With the parcel shelf lining removed, it is now possible to remove the seatbelts. I used a T50 Torx bit on a couple of extension pieces to undo the retaining bolt. As I had already undone the other end from the seat, with this bolt removed they just lifted out.
This is just a shot of the seatbelt mechanism.
Whilst in this area, Andy covers removal of the T-bar angle.........

Nice easy one this, 4 No 8mm bolts, a pair each end - undo and remove.
Once I had removed all the parcel shelf gubbins, I then re-fastened the rear of the hood. This shot shows 4 of the 5 overcentre catches, I took it because there are no clear shots of them on the web as they are usually photographed as part of the undoing process and this means the parcel shelf lining is in the way. Scarlet's shelf is stripped out completely now so getting a good photo was easy and it shows exactly how they fasten the rear of the hood.